Drift eliminators are used in air treatment units (ATU), Scrubbers, ventilation and humidification systems, and what characterizes them is their strong thermo-mechanical resistance. They are produced in PP (on request in PVC only for some models) and their characteristics meet the extinguishing standards (CTI 136 and ASTM E-84).

Their function is mainly to separate the drops of water present in the air flow for vertical flows (modular panel separators), furthermore their efficiency is equal to 99% (with nominal speed of

3 m/s) and is measured in basis of the expulsion of water into the air, in proportion to the quantity of water at the section of the separators. They also allow excellent water distribution, maximizing the use of the contact surfaces and increasing their performance. They are also used in inlet hoods, for vertical air flows, as they prevent water droplets and dirt from entering the turbine.

LBAR20PP

Designed for horizontal air flows with front speed between 1 m/s and 4 m/s and with a water / air ratio (2 l/m³) with a standard pitch of 25 mm. It has three changes of direction which, associated with the use of low speeds, favors the removal of very small drops in the presence of high water loads.